This plugin uses movement from a Flowfal device to produce MIDI Continuous Controller (CC) data. You would normally use this to control an external synth or other MIDI capable device.

The channel selector and input drop-down list of the plugin behave in the same way as all the other Flowfal plugins - see the Common Controls section.

The right hand side of the plugin allows the user to select which CC controller should be output. If the 14 Bit button is enabled, then high resolution controller messages will be sent for controllers 0 to 31.

When the Learn button is pressed (and MIDI is enabled to arrive at the plug in when, for example, the track is armed) then the first MIDI CC value received will set the Controller value for the plug in. This allows you to set the CC value being used by pressing or moving the corresponding control on the device that you wish to control.

The Min and Max controls set the maximum and minimum CC output values. These values can be reversed to reverse the direction of the output values.